Honey Comb Style Driveroller Set

Not rated yet
0

Free Shipping for orders over $50 within the USA (Canada and international orders will be charged shipping).

This set of driverollers is the honey comb style. The driverollers are the two rollers located in the center of the NordicTrack. If your skier feels like it is slipping you will need to replace the driverollers. The honey comb driverollers were on most of the skiers from 1995 to 1998. This set comes with 2 new driverollers. We do include very detailed installation instructions and it is simple to install the driverollers. Remove the skis, tip the skier on its side, remove the two #3 phillips screws and the four 1/2 bolts located on the wooden side board, once you remove the side board the driveroller will slide off the flywheel axle, then wipe the flywheel axle off with a paper towel soaked in rubbing alcohol, then install the new driveroller so it spins freely forward and locks in the back stroke, then re-install the sideboard and repeat these steps to the other side. Its easier to do one side at a time. NEVER EVER LUBRICATE the driverollers this could cause the one-way roller clutch bearing inside of them to slip.

If your NordicTrack skier is slipping in the back stroke then these rollers are what you need to repair your ski machine.

Replacing the driverollers is very easy. Just make sure you install the replacement rollers so they both spin freely forward and lock in the back stroke. 

The driverollers we sell are manufactured from the original company who supplied them to NordicTrack in the 80's and 90's. In fact, we own the original mold and these are only produced for NordicParts.com. 

  • $92.50
Qty:  

Free Shipping for orders over $50 within the USA (Canada and international orders will be charged shipping).

This set of driverollers is the honey comb style. The driverollers are the two rollers located in the center of the NordicTrack. If your skier feels like it is slipping you will need to replace the driverollers. The honey comb driverollers were on most of the skiers from 1995 to 1998. This set comes with two driverollers. The honey comb style will fit any wood style skier built from 1976 to present. We do include very detailed installation instructions and it is simple to install the driverollers. Remove the skis, tip the skier on its side, remove the two #3 phillips screws and the four 1/2 bolts located on the wooden side board, once you remove the side board the driveroller will slide off the flywheel axle, then wipe the flywheel axle off with a paper towel soaked in rubbing alcohol, then install the new driveroller so it spins freely forward and locks in the back stroke, then re-install the sideboard and repeat these steps to the other side. Its easier to do one side at a time. NEVER EVER LUBRICATE the driverollers this could cause the one-way roller clutch bearing inside of them to slip.

If your NordicTrack skier is slipping in the back stroke then these rollers are what you need to repair your ski machine.

Replacing the driverollers is very easy. Just make sure you install the replacement rollers so they both spin freely forward and lock in the back stroke. 

The driverollers we sell are manufactured from the original company who supplied them to NordicTrack in the 80's and 90's. In fact, we own the original mold and these are only produced for NordicParts.com. 

    • Weight
      1.0000 lbs
    • SKU
      WS1004SH
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Customers who bought this product also bought