|Free Shipping within the USA |
If your NordicTrack skier is slipping you need to replace the driverollers. The driverollers are the two rollers located in the center of the machine near the flywheel.
These driverollers are new and will fit any wood style skier built from 1976 to 1999 and NordicSport skiers that used a metal flywheel and dragstrap. Two come in a set. For best results, purchase this set. These driverollers are manufactured in the US by NordicParts.
Fits all wooden style Skiers: 505, 530, 600, Challenger, Sequoia, Excel, Pro, All American, Easy Ski, Achiever, Strength Aerobics, 20th Anniversary Medalist, and Elite. These driverollers will fit NordicSport skiers that used a metal flywheel and dragstrap
These driverollers are 2.355 inches in height.
We do include detailed installation instructions and it is simple to install the driverollers. Remove the skis, tip the skier on its side, remove the two #3 phillips screws and the four 1/2 bolts located on the wooden side board, once you remove the side board the driveroller will slide off the flywheel axle, then wipe the flywheel axle off with a paper towel soaked in rubbing alcohol, then install the new driveroller so it spins freely forward and locks in the back stroke, then re-install the sideboard and repeat these steps to the other side. Its easier to do one side at a time. NEVER LUBRICATE the driverollers as this could cause the one-way roller clutch bearing inside of them to slip.
If you have a ICON skier which would have been produced after 1999 then please contact us prior to ordering.