Wood Style Skier Parts - Product list

See details  Book Holder The book holder is a must have accessory for your wood style skier, it has a slot for a walkman and a cupholder plus its sturdy enough to hold a book. These book holders are new and manufactured by the same Minnesota based company who supplied them to the original NordicTrack Company. Price: $ 37.50 BUY NOW>> See details  Overhaul Kit Complete overhaul kit. If you want your wood style skier to run as good as the day it was new you should purchase this kit, it includes: New Driverollers, Dragstrap, Endrollers, A/E bearing, A/E Leather Pad and an Arm Cord. Achiever, Medalist and Elite skiers will receive all parts included in... Price: $ 135.00 BUY NOW>> See details  Driveroller Set Wood Style Skier If your NordicTrack skier is slipping you need to replace the driverollers. The driverollers are the two rollers located in the center of the machine near the flywheel. These driverollers are new and will fit any wood style skier built from 1976 to the present and NordicSport... Price: $ 65.00 BUY NOW>> See details  One Driveroller The driverollers are the two rollers located in the center of the machine near the flywheel. The price for a single driveroller is $35.00. We do include very detailed installation instructions and it is simple to install the driverollers. Remove the skis, tip the skier on its side,... Price: $ 35.00 BUY NOW>> See details  Honey Comb Style Driveroller Set This set of driverollers is the honey comb style. The driverollers are the two rollers located in the center of the NordicTrack. If your skier feels like it is slipping you will need to replace the driverollers. The honey comb driverollers were on most of the skiers from 1995 to 1998. This set... Price: $ 55.00 BUY NOW>> See details  One Honey Comb Driveroller This is for one Honey Comb style driveroller. This style of driveroller came on most of the wood style skiers from 1995 to 1998. If your skier feels like it is slipping that means the driveroller has worn out. For best results purchase a set. They are also listed separately on this site. Price: $ 30.00 BUY NOW>> See details  3inOne Oil The only lubrication that should be used on your NordicTrack is 3inOne Oil. Lube the wheels that spin freely at the front and back of the skier, lube the leather pad that sits under the arm cord drum, lube the bearing that sits on top of the arm cord drum. DO NOT LUBRICATE THE DRIVEROLLERS. Price: $ 5.50 BUY NOW>> See details  Drag Strap The Drag Strap is the strap that wraps around the flywheel. Fits all wooden style Skiers: 505, 530, 550, Excel, Challenger, Sequoia, Limited, Pro, Achiever, Medalist, and Elite simply . Dragstraps will be Black in color. Please specify your model to make sure you get the correct... Price: $ 15.00 BUY NOW>> See details  Pro Drag Strap Spring The spring is connected to the front frame and the drag strap. This spring will only fit: Pro, Excel, Challenger, Sequoia, 505, 530, Easy ski, Limited. If you have an Achiever, Medalist or Elite skier this spring WILL NOT FIT. Price: $ 5.00 BUY NOW>> See details  Monitors We currently are out of stock of NEW monitors but we do have a few reconditioned monitors in our inventory. The prices range from $75 to $100. If you would like a price for a replacement of your exact monitor please email us at chad@nordicparts.com with a photo of your exact monitor and we will... Price: $ 0.00 BUY NOW>> See details  Pro Decal Sticker set The decal sticker set includes two stickers that were placed on each side of the wooden side board this are for the Pro model. You can also use these on your cars bumper if you want to show your love for your NordicTrack. Price: $ 10.00 BUY NOW>> See details  Toe Strap Located on top of the skis. The price is $10.00 for one. If you need two please enter 2 as the quanity. The toe straps we manufacture are the strongest style that NordicTrack produced you will never break one of our toe straps. Price: $ 10.00 BUY NOW>> See details  Side Board Bearing The Side Board Bearing is located at each end of the flywheel axle. Two are required per machine. Price: $ 7.50 BUY NOW>> See details  Arm Exerciser Cord Fits all wooden style skiers, NordicSport, and Club models. Not available for Plus series. It is very simple to install the arm cord. You need to untie the cord inside of the grips, or you can cut the old cord, remove the knob, spring, bearing assembly, then lift the drum assembly... Price: $ 10.00 BUY NOW>> See details  Arm Exerciser Pulley Assembly This pulley is located on the top of the arm exerciser. The arm cord wraps around the pulley. Two are required per machine. Price: $ 20.00 BUY NOW>> See details  A/E Pulley Bushing Set This bushing is used in the A/E pulley assembly there are two required per skier and are located at each corner of the arm tube. If you do not lubricate your A/E pulley with 3inOne oil every couple months most likely you will wear out this bushing if you have worn out you bushing please add this... Price: $ 3.00 BUY NOW>> See details  Arm Exerciser Drum Spring Fits all wooden style Skiers Price: $ 8.00 BUY NOW>> See details  Arm Exerciser Grip Fits all Skiers. This Grip is made of a very hard material it should never rip like the softer grip that NordicTrack produced. Price: $ 5.00 BUY NOW>> See details  Arm Exerciser Combo: Cord, Drum, Grips The A.E.Combo, includes the cord, drum and two grips. Price: $ 50.00 BUY NOW>> See details  Flywheel Axle This is the flywheel axle the driverollers ride on. If you have an ICON skier you most likely are replacing your flywheel axle every couple years this flywheel axle is much harder and will be nearly impossible to wear out. If you have grooves worn into your old flywheel axle replace it with this... Price: $ 25.00 BUY NOW>> See details  Nylon and Steel Washer Set The nylon and steel washers are located on each side of the driverollers. There is one nylon washer on each side of driveroller then one steel washer sits next to the nylon washer. Price: $ 6.50 BUY NOW>> See details  Arm Exerciser Leather Resistance Pad Located under the arm exerciser drum. Once this pad becomes blackened you should replace it. Lube pad with 3inOne Oil every couple months. If your skier has two glued on leather pads you will need to get two metal clips to hold this style in place the cost of two metal clips is $5.00. Skiers in... Price: $ 8.00 BUY NOW>> See details  Clips for A/E pad These clips are used to hold the retangle leather A/E pad in place. Skiers manufactured in the 1970's to the late 1980's that used the retangle leather A/E pad had glued on leather pads NordicTrack updated the leather pad to be able to be replaceable they did this by placing two metal clips that... Price: $ 5.00 BUY NOW>> See details  Strength Aerobics, Easy Ski, Walkfit & Leg Shaper Leather Brake Pad 4 leather brake pads are required on the Strength Aerobics and Easy Ski skiers. These pads were also used on the Walkfit treadmills and the Leg Shaper. The cost of each pad is $8.00. These pads are used for the arm tension. Lubricate these pads with 3inOne Oil every couple months. Replace pads... Price: $ 8.00 BUY NOW>> See details  U-Bolt The U-Bolt Holds the flywheel tight onto the FLywheel Axle Price: $ 8.50 BUY NOW>> See details  1/4 detent pin set The 1/4 detent pin was used for the leg elevation and also used for the upright tube on skiers manufactured in the 1970's to the early 1990's. The price for two pins is $15.00 Price: $ 15.00 BUY NOW>> See details  3/8th Detent Pin with washer The 3/8th detent pin was used on 1991 to mid 1994 skiers. The 3/8th detent pin is used to hold the upright tube from falling down it connects the upright tube to the front frame. If you skier used a 3/8th snap button this pin will replace the snap button. Price: $ 7.50 BUY NOW>> See details  Arm Exerciser Round Leather Resistance Pad This pad fits only the Achiever, Medalist, Elite, Club. Price: $ 10.00 BUY NOW>> See details  Arm tension pointer Achiever, Medalist, Elite and Club models used this pointer to show you the arm tension. The leather A/E pad mounts on this pointer. The early units did not have the two knubs to hold the round leather A/E pad in place if you have a 1987 to 1988 skier that used a pointer for the arm tension you... Price: $ 25.00 BUY NOW>> See details  Arm Exerciser Resistance Spring Fits only Achiever, Medalist, Club, and Elite models. This spring was also used as a dragstrap spring for some NordicSport models Price: $ 10.00 BUY NOW>> See details  Arm Exerciser Resistance Bearing This bearing is located between the A/E Drum and the A/ESpring. If your arm tension is slipping you will need to replace the A/E resistance bearing. Price: $ 10.00 BUY NOW>> See details  Hippad Slider Bumpers These Hippad bumpers are located on the inside of the hippad slider, there is one on the front side and one on the back side of the slider they are used to prevent the slider from rocking back and forth. Most people lose these once they take the hippad slider off the upright tube. The cost of two... Price: $ 10.00 BUY NOW>> See details  Leg Tension control Achievers, Medalist and Elite models used a leg tension knob to control the leg tension. If you turn the knob when not sking on the unit you will strip out the gears inside the knob. If you have stripped out the gears you will not be able to adjust your leg tension. If you have stripped out your... Price: $ 85.00 BUY NOW>> See details  Leg tension control deluxe model Achievers, Medalist, Elite and CLub models used a leg tension knob to control the leg tension. If you turn the knob when not sking on the unit you will strip out the gears inside the knob. If you have stripped out the gears you will not be able to adjust your leg tension. If you have stripped out... Price: $ 125.00 BUY NOW>> See details  Tension Control bracket The Achiever, Medalist and Elite skiers and a tension control on the right side of the skier to control the leg tension this leg tension control mounted to a bracket. If you need the bracket please add this to your cart Price: $ 15.00 BUY NOW>> See details  Arm Exerciser Knob The A/E knob is located on the top of your arm cord drum. Price: $ 10.00 BUY NOW>> See details  Extended Arm Exercisor Hip Pad Support Bracket This bracket is designed for people over six feet tall. Fits all wooden style Skiers, EXCEPT Elite and challenger model. This is the bracket the hip pad screws into. Price: $ 25.00 BUY NOW>> See details  Arm Exerciser Hip Pad Support Bracket Fits all wooden style Skiers, EXCEPT Elite and Challenger model Price: $ 25.00 BUY NOW>> See details  Upright tube rubber stopper This rubber stopper fits on top of the upright tube to prevent the hippad slider from coming off and to prevent you from hurting yourself on the sharp metal edges of the upright tube. Price: $ 10.00 BUY NOW>> See details  Arm Exerciser Hip Pad Fits all wooden style Skiers Price: $ 40.00 BUY NOW>> See details  End Roller The End Rollers are the four rollers that spin freely. Two are located in the front and two are located in the rear. Four come in a set, purchasing a set will produce the best results. Sets are listed separately in this category. Price: $ 12.50 BUY NOW>> See details  End Roller Set The End Rollers are the four rollers that spin freely. Two are located in the front and two are located in the rear. Four come in a set. Skiers manufactured in the 70's and most of the 80's had 8 endrollers. Please specify if your skier has 4 or 8 endrollers. If your skier had 8 endrollers then... Price: $ 40.00 BUY NOW>> See details  End Roller Axle Four are required per machine. The Axle goes through the inside of the End Rollers. Price: $ 6.00 BUY NOW>> See details  Smaller Solid Endroller The smaller soild endroller was used on the skiers manufactured in the 1970's through the late 1980's. There were a total of 8 endrollers. The smaller solid endrollers are located at the front and the back of the NordicTrack. The endroller axles need to be lubricated with 3inOne oil every couple... Price: $ 7.50 BUY NOW>> See details  Smaller Solid Endroller Set of Eight Add this item to your cart if you want to order a set of eight. The smaller soild endroller was used on the skiers manufactured in the 1970's through the late 1980's. There were a total of 8 endrollers. The smaller solid endrollers are located at the front and the back of the NordicTrack. The... Price: $ 40.00 BUY NOW>> See details  Front Frame The front frame supports the two front end rollers and it is connected to the upright tube. NordicTrack manufactured many different styles of front frames. We need to know the model, the style and the year. The Style means how you fold the upright tube down. The year can be found on a sticker... Price: $ 75.00 BUY NOW>> See details  PRO Conversion Kit If you have a Sequoia, Excel, 505 or Challenger you know that you cannot elevate the front end with this kit you can convert your non elevating skier to be just like a Pro skier. You will have six different levels to adjust the height of your skier. Its very simple to convert your skier it will... Price: $ 135.00 BUY NOW>> See details  Front Legs, Pins, Bracket and Bolts If you have moved and have lost your NordicTrack legs, bracket, pins and bolts we have a kit for you. Please add this item to your cart if you have lost your entire front leg assembly. Price: $ 75.00 BUY NOW>> See details  Skier Foot Sand Paper Located on top of the skis. Each set includes two sand paper pads. Traction paper is gray in color Price: $ 10.00 BUY NOW>> See details  Computer Power Cable This cable reaches from the computer to the upright tube. We custom manufactured this cable to be 30.5 inches long. This cable is not coiled we discovered that the coiled cables became stretched after years of use. Price: $ 15.00 BUY NOW>> See details  Chrome Leg Pin The chrome leg pins hold the front legs in place. Each Chrome leg pin is $8.50 Price: $ 8.50 BUY NOW>> See details  Chrome Leg with rubber foot Adjustable chrome leg with rubber foot. NordicTrack had produced legs with 5 holes and ones with 6 holes. If you choose only leg please choose how many holes your orginal one has. Price: $ 20.00 BUY NOW>> See details  Rubber foot The rubber feet are located on the front legs or on some models on all four corners. Comes with a steel washer in each foot. Each rubber foot is $4.00. Please specify which model you have so we can get you the correct size. Price: $ 4.00 BUY NOW>> See details  Machined Flywheel The flywheel is a very important component of your skier. If your flywheel is rusty you need to clean it or replace it. If your skier has the black 3/4 inch strip where the dragstrap rides you need to replace it with the machined style flywheel. To see a solid black flywheel and a rusty flywheel... Price: $ 50.00 BUY NOW>> See details  Used Set Of Skis No new skis are available. This used set comes with 2 skis, 2 toe cups and traction paper or rubber traction pads. The most important thing when it comes to your skis is that they are not warped. If you hear a banging or clunking sound from your skier that means your skis are warped. Price: $ 75.00 BUY NOW>> See details  T Nut This plastic T nut is used on both sides of the NordicTrack to raise and lower the hippad and arm tube slider. If yours is missing or stripped you need to replace it. Price: $ 7.50 BUY NOW>> See details  Upright Frame Tube Snap Button This snap button is used on the inside of the Chrome upright tube that connects to the front frame. When you fold your NordicTrack up the snap button holds the tube into place. This snap button measures 3/8 inch If your NordicTrack came with the 3/8 detent pin this snap button will replace the... Price: $ 7.50 BUY NOW>> See details  Arm Tube Snap Button This snap button is used on the inside of the chrome arm tube that connects the arm tube to the hippad slider. This snap button measures 3/8 inch. Price: $ 7.50 BUY NOW>> See details  30LB Spring Set These springs came on the Achievers, Medalist and the Elite models they connect to the leg tension indicator gauge. If your leg tension gauge reads up to 30lbs these springs will work perfectly. If you leg tension gauge reads up to 50lbs these springs will not work. Price: $ 15.00 BUY NOW>> See details  Round Mechanical Speedometer and cable This round mechanical speedometer was used on the NordicTracks in the mid to late 80's. If your speedometer looks exactly like this it will work perfectly. If your speedometer is flat at the bottom like the second photo then this one for sale will not fit or replace that style Price: $ 60.00 BUY NOW>>